The code scanner is specially designed to work with most  Volkswagen and Audis sold worldwide of 1990 or newer models ,If a VW/AUDI has a 16-pin “OBD-II style ”Data Link Connector (DTC),the code reader will certainly work .If it has an old-style 2×2Data link connector (DTC),then it depends on whether there are 4 or 3 wires connecting to the pins .If there are 4 wires , each connecting a pain ,then it will work .If there are only 3 wires ,leaving one pain disconnected ,then it will work .
For VW/AUTD with old-style 2×2Data Link Connector (DTC),you need to have a 2×2 cabling adapter which is not included in this product package.
The  code scanner is an OEM level diagnostic scan tool for most VW/AUDIs sold worldwide since 1990. Accurate,reliable and easy to use, the MaxScan VAG405 is a time saver and a money maker!

Features & Benefits:

• Works with Volkswagen and Audi(Audi/Seat/Skoda/Jetta/Golf/Beetle/Touareg/GTI/ Passat and more) sold worldwide since 1990sold worldwide since 1990.
• Reads and erases Diagnostic Trouble Codes(DTCs) of most electronically controlled vehicle modules, including Engine, ABS, Airbags, Transmission, Radio, Climate Control(A/C), Cent. Elect., Steering Wheel, Instruments, Immobilizer, etc.
• Reads and clears generic trouble codes of cars using ISO 9141-2 ("CARB"), ISO 14230 ("KWP-2000") and ISO-15765 ("CAN") protocols.
• Turns off MIL lights of engine, airbags, ABS , A/T and most other systems
• C.A.N.(Controller Area Network) Capability
• Resets oil service light
• Retrieves vehicle information (VIN)
• Displays I/M Readiness Status.
• Displays DTC definitions on Unit Screen
• Highly reliable and accurate
• Easy to use with friendly interface
• Safely communicates with the on-board computers
• Large, easy-to-read backlit LCD
• System Upgradeable via internet
• Stand-alone unit with no need for an additional laptop computer to operate
• One-year warranty against defects
• Extremely easy to use and highly reliable

The scanner works with the following protocols:

• J1850 PWM
• J1850 VPW
• KPW 2000
• ISO 14230-04
• ISO 9141

Easy To Use:

• When your "Check Engine" light or "Service Engine Soon" lights up, stop the car and apply the parking brake.
• Switch on the ignition and then plug the code reader into the 16-pin diagnostic socket (OBD-II connector) usually located under the instrument panel in the car.
• Push the Read button and the unit automatically gets the Diagnostic Trouble Codes (DTCs) in less than 10 seconds.
• Identify the trouble codes and retrieve their detailed descriptions by looking up the Diagnostic Trouble Codes(DTCs) list in the enclosed user manual.
• Know what is wrong and save yourself lots of money!!!!

Will It Work With My Car?

• Acura Kia
• Asuna Land Rover
• Audi Lexus
• Bentley Lincoln
• Buick Mazda
• Cadillac Mercury
• Chevrolet Mini
• Chevy Murkur
• Chrysler Nissan
• Citroen Oldsmobile
• Daewoo Opel
• Dodge Peugeot
• Eagle Plymouth
• Fiat Pontiac
• Ford Porsch
• Geo Renault
• GM Rover
• GMC Saab
• Honda Saturn
• Hummer Scion
• Hyundai
• Infinity
• Isuzu
• Jaguar
• Jeep

Contain:

• 1 x VAG405 TOOL
• 1 x OBD II Cable
• 1 x User's Manual（ENGLISH)
• 1 x Nylon Carry Case